Skip to content

Battery review · EP11

FoxESS EP11 battery review

By CompareVolt · Updated · Last full check

AI studio illustration: one dark grey FoxESS EP11 battery unit with a side switch window.

CompareVolt rating

6.9 out of 10

Often named on VPP lists we track, this 10.36 kWh unit suits listed FoxESS hybrids; a second needs a junction box.

  • Warranty10 yrs; 38.4 MWh limit, age cap
  • Functionality10.4 kWh, 10.4 kW DC; needs inverter
  • VPP readiness6 programs; 4 name the EP11
  • Australian backingSince 2020; installer-only claims
How this score adds up
Rubric lines and points behind this rating
Warranty 6.5 (30%)
Term: 10 years2.0 of 3
Keeps 70% at year 101.5 of 2
Home use: 38.4 MWh, 3.71 MWh per kWh2.0 of 3
Conditions: ends 125 months after manufacture; narrower temperature range1.0 of 2
Functionality 7.0 (35%)
Power and backup 7.5 · 60% of Functionality
Continuous power: 10.368 kW battery DC; the inverter sets AC output3.5 of 4
Backup equipment: needs a separate FoxESS hybrid inverter1.0 of 2
Backup output: set by the inverter1.0 of 2
Three-phase homes: listed with H3 Smart and H3 Pro2.0 of 2
Capacity and expansion 5.0 · 30% of Functionality
Largest documented system: 10.36 kWh (one EP11; up to 4 in parallel through a separately bought junction box)1.0 of 4
Adding later: up to 4 in parallel; existing units at 50% charge, ±5%2.0 of 4
Usable figure: 10.36 kWh, agreed2.0 of 2
Enclosure 10.0 · 10% of Functionality
Enclosure rating: IP6510.0 of 10
7.5 × 60% + 5.0 × 30% + 10.0 × 10% = 7.0
VPP readiness 9.5 (15%)
Open programs: 4 name EP11, 2 list FoxESS8.0 of 8
Warranty room for VPP use: 3.71 MWh per kWh1.5 of 2
Australian backing 5.5 (20%)
Presence: FoxESS Australia Pty Ltd, Springvale3.0 of 3
In Australia since 20201.5 of 2
Claim route: installer or authorised personnel only0.5 of 2
Claim costs: not stated0.5 of 3
Overall: 6.5 × 30% + 7.0 × 35% + 9.5 × 15% + 5.5 × 20% = 6.925, rounded to one decimal: 6.9

Rubric 1.0 · scored 17 Nov 2026 · How we rate batteries · Source documents

Rated so far: 38 batteries, from 4.4 to 8.2. Compare similar batteries · Use the quote checklist

In a nutshell

What’s good

  • Named on VPP lists. Several retailer VPP lists name the EP11 itself, not just the FoxESS brand.
  • Three-phase documented. FoxESS's configuration guide lists the EP11 with H3/AC3, H3 Smart and H3 Pro three-phase inverters as well as single-phase H1-G2 and KH.
  • Wall or floor mounting. One 147 mm-deep unit mounts on a wall or the floor, indoors or outdoors, with an IP65 rating.
1 more good point
  • All capacity usable. At 100% depth of discharge, all 10.36 kWh is usable; the warranty table and the CEC list give the same figure.

What to watch

  • Growing needs a junction box. Going past one unit means running each battery's power cable to a junction box bought separately; units added later need the existing system at 50% ± 5% charge.
  • No EP11 output table. FoxESS publishes no figure for what each inverter can supply from an EP11, so household output has to be confirmed for your inverter.
  • Smaller throughput allowance. The 38.4 MWh limit is less per usable kWh than the EQ5500-L5 and CQ6-L7 stacks get under the same policy.
2 more things to watch
  • Shelter still needed. Despite IP65, the manual asks for protection from direct sun, rain and snow and says the battery modules are not water resistant.
  • Inverter required. The EP11 needs a separate FoxESS hybrid inverter and commissioned backup wiring; the battery alone gives no blackout protection.

Good fit for: A household wanting about 10 kWh on a listed FoxESS hybrid inverter, single- or three-phase, perhaps for a VPP whose list names the EP11.

Look elsewhere if: You expect to need more than one unit and don't want a separately bought junction box, or the site can't give a 99 kg unit shelter and 300 mm of clearance.

All specifications and notes

Capacity and power

Usable capacity10.36 kWhUsable capacity of one unit at 100% depth of discharge, per the Australian datasheet, the warranty table and the CEC list. Extra units connect in parallel through a separately bought junction box.
Battery nominal power10.368 kW DCBattery rating at 384 V and the 27 A current limit, not household AC output. Current varies with temperature, cell voltage and state of charge.
Household AC outputDepends on inverterFoxESS publishes no EP11 output table. One unit's 27 A is below the H1-G2's 40 A and KH's 50 A limits, so its 10.368 kW DC and the inverter's AC rating set output.
Performance warranty10 years or 38.4 MWhWhichever comes first, with 70% energy retention; capped at 125 months from manufacture. Registration at commissioning and a −10°C to 50°C ambient apply.

Manufacturer’s figures

As stated in the manufacturer’s Australian datasheet. Shown for reference; they don’t change the score.

Round-trip efficiency≥95%How much of the energy you store comes back out when you use it.Battery pack only; the datasheet states no conditions
Cell chemistryLFP (LiFePO4)The type of battery cell the maker says is inside.

More specifications

Battery typeOne 384 V high-voltage unitOperating range 348–438 V. A self-contained unit with no main or support modules; more units go in parallel, not in a stack.
Size and weight710 × 625 × 147 mm, 99 kgWidth × height × depth; weight ±2 kg. Floor or wall mounted, indoors or outdoors.
Operating temperatureCharge 0–55°C, discharge −10–55°CThe Australian datasheet lists no heated version.
EnclosureIP65, indoor or outdoorThe manual still asks for shelter from direct sun, rain and snow and 300 mm clearance, and says the battery modules are not water resistant.
Expansion limitUp to 4 units in parallelThrough a separately bought junction box; added units need the existing system at 50% ± 5% charge. The datasheet says 41.6 kWh; 4 × 10.36 kWh is 41.44 kWh.
Warranty temperature−10°C to 50°C ambientNarrower than the datasheet's 55°C operating maximum.

What the system needs

One EP11 batteryA 384 V high-voltage unit, floor or wall mounted. It connects straight to the inverter; two to four units need a separately bought junction box.
Listed FoxESS hybrid inverterH1-G2/AC1-G2 or KH/KA single-phase, or H3/AC3, H3 Smart or H3 Pro three-phase, per FoxESS's configuration guide. Its AC rating and battery-current limit set household output.
Backup wiring and commissioningBackup comes from the inverter's EPS (backup) output, wired by the installer to chosen circuits; the battery alone doesn't provide it.
Warranty registrationThe installer registers the battery with FoxESS and connects it at commissioning, a stated warranty precondition.

The EP11 is a single 384 V high-voltage battery, wall or floor mounted, on a separate FoxESS hybrid inverter. This review covers one 10.36 kWh unit; up to four can run in parallel through a separately bought junction box.

Capacity and power

The EP11 is a single self-contained 384 V high-voltage unit, not a stack of modules. FoxESS's August 2026 Australian datasheet rates a single unit at 10.36 kWh, all of it usable, with an operating range of 348–438 V. There are no main and support modules, and more units are added in parallel rather than stacked. It mounts on a wall or the floor and weighs 99 kg.

The 10.368 kW nominal power is the battery's own DC (direct current) rating: 384 V at its 27 A current limit, which FoxESS says varies with temperature, cell voltage and state of charge. The inverter turns DC into AC, the mains power your home uses, so its AC rating and its own battery-current limit set what reaches your power points. The H1-G2 datasheet gives a 40 A battery limit and the KH datasheet 50 A, both above one EP11's 27 A. Unlike the EQ5500 and EP12 Plus (w), the EP11 has no FoxESS table of what each inverter can draw from it, so get that figure in writing for your inverter.

Growing it takes extra hardware. The datasheet allows up to four units in parallel and gives "a maximum storage capacity of 41.6kWh", although four times 10.36 kWh is 41.44 kWh. Under the EP11 user manual (on FoxESS's download page), a single unit connects straight to the inverter. For two or more, each battery's power cable goes to a junction box that must be bought separately, and one battery is set as the main battery. Adding units later comes with conditions: the manual asks for new batteries that are within warranty scope or were recharged within the last six months, and for the existing system to sit at 50% ± 5% charge.

Backup and installation

Check the inverter against FoxESS's configuration guide. We found no EP11 compatibility list or declaration on FoxESS's Australian site. The Australian document that names its inverters is FoxESS's inverter and battery configuration guide. It lists one to four EP11 with single-phase H1-G2/AC1-G2 and KH/KA inverters and three-phase H3/AC3 and H3 Smart, and one to eight with the H3 Pro, which has two battery inputs. The guide dates from October 2024, so ask FoxESS to confirm in writing any inverter it doesn't list.

Backup comes from the inverter's EPS (backup) output, not the battery. Specify the backed-up circuits and the reserve (the charge kept for blackouts). One EP11's nominal power is 10.368 kW DC, so on an inverter rated above that, ask in writing what it will run from the battery with no solar; FoxESS gives no figure.

The unit is rated IP65 (dust and water) for indoor or outdoor use, yet the manual asks you to avoid direct sunlight, rain and snow, to leave at least 300 mm of clearance for cooling, and says the battery modules are "not water resistant". On a wall, the mounting surface also has to carry 99 kg.

Warranty and ownership

The battery warranty promises the EP11 keeps 70% of its energy for ten years from installation or 38.4 MWh of throughput (total energy passed through it), whichever comes first. Cover is capped at 125 months from manufacture. It covers the battery only; FoxESS inverters have their own warranty.

Working the warranty’s energy limits through at one full charge and discharge a day:

  • Energy limit: 38.4 MWh, about 3.71 MWh per usable kWh. At one full charge and discharge a day that is reached in about 10.2 years, so the 10-year term ends first.

Under the same policy, the EQ5500-L5 and CQ6-L7 stacks get more throughput per usable kWh. At one full cycle a day the ten-year term still ends first, but with little to spare, and more than a cycle a day reaches the energy limit sooner. The policy does not mention virtual power plant (VPP) use, so get written confirmation for a specific program.

Registration and connection to FoxESS at commissioning (the installer's final set-up and switch-on) are stated preconditions, although a later clause asks for registration within 36 months and advises doing it within six weeks. It is a one-off step: have the installer register at commissioning and keep proof. The policy also excludes installation by a non-accredited installer and requires an ambient (surrounding air) temperature between −10°C and 50°C, narrower than the datasheet's 55°C operating maximum.

The manual asks for an over-discharged system to be charged within seven days, and its exclusions include improper charging or discharging. Keep the system connected and charging through long absences. Australian Consumer Law rights remain alongside the written warranty.

Brand and Australian support

Support evidence checked 17 November 2026. FoxESS was founded in 2019 and opened its Australian branch in 2022. The warranty names FoxESS Australia Pty Ltd in Springvale, Victoria, as importer; that company has been registered since 19 May 2020 (checked 15 November 2026). The contact page lists Springvale and St Leonards offices, a 1300 number and a service email. That gives you a local contact; it doesn't tell you how fast claims are handled.

Under the battery warranty, only the installer or people FoxESS has authorised can make claims. If the installer goes into administration, the end user or installer may appoint a local installer at their discretion and expense. FoxESS says it will approve and dispatch a replacement within three working days, subject to availability, and may charge an inspection fee or recover costs when a returned unit has no qualifying defect. It does not clearly promise free labour or freight.

We found no FoxESS recall in the ACCC, CEC or Energy Safe Victoria registers.

Price and alternatives

FoxESS's EP11 page shows no price. Ask for an itemised installed quote covering the battery, the inverter, any junction box and cabling for extra units, backup hardware, electrical work, commissioning and GST.

The federal program's eligibility rules require a battery on the Clean Energy Council list. On 17 November 2026 the EP11 was listed as BAT-525, a pre-assembled battery system with 10.36 kWh usable, approved on 6 June 2024 and expiring on 6 June 2027, so check that the listing is still current on your installation date. One EP11 sits within the first 14 kWh band of the federal battery rebate. Have the quote show the count of STCs (small-scale technology certificates, the rebate's unit), their price and the installation date.

Retailer lists name this line directly. On the day we checked, AGL's FoxESS table, CovaU's list and Origin's Battery Lite list named the EP11. ENGIE's FoxESS list names an "EP11-H", a suffix FoxESS's own documents don't use, so ask ENGIE to confirm your model; one EP11 just clears ENGIE's 10 kWh minimum. AGL's, ENGIE's and Origin's lists also name FoxESS inverter series, so check the inverter too.

Within FoxESS's range, the EP12 Plus (w) holds 11.52 kWh in our catalogue, and the two-module EQ5500-L2 (10.92 kWh) and CQ6-L2 (11.98 kWh) stacks grow by adding modules. These are specification differences only. Compare complete systems in the battery catalogue, or see every line on our FoxESS brand page.

Who it suits

Estimate overnight use with the battery size calculator and check whether about 10 kWh, less any backup reserve, covers it. If it falls well short, compare two or more EP11 plus the junction box with a single larger system before choosing.

If you already have a FoxESS hybrid, the EP11 can add storage to it when the configuration guide lists that model. If not, the inverter is part of the purchase, so compare whole systems rather than battery prices. If you plan to join a VPP, confirm that the program's list names both your battery and your inverter, and ask how often it will fully discharge the battery.

Before paying, reconcile the battery label, inverter model, any junction box, installation location and warranty registration against the equipment delivered.

How it compares

Other reviewed batteries closest to 10.36 kWh of usable capacity.

See all reviewed batteries

Questions people ask

Which inverter works with the FoxESS EP11?

FoxESS's Australian configuration guide, from October 2024, lists one to four EP11 with H1-G2/AC1-G2, KH/KA, H3/AC3 and H3 Smart inverters, and one to eight with the two-input H3 Pro. Ask for the exact inverter model in writing.

Is the FoxESS EP11 a high-voltage battery?

Yes. The datasheet calls it a high-voltage storage battery with a 384 V nominal voltage. Extra units are added in parallel rather than stacked.

Can I add another EP11 later?

Up to four can run in parallel, with each power cable going to a junction box bought separately. The manual asks for the existing system to be at 50% ± 5% charge when new units go in.

How long is the FoxESS EP11 battery warranty?

The EP11 keeps 70% energy for ten years from installation or 38.4 MWh of throughput, whichever comes first, capped at 125 months from manufacture. Registration at commissioning is a condition.

How long will 10.36 kWh last?

Divide 10.36 kWh by your average load: about 10 hours at 1 kW or about 3.5 hours at 3 kW. This is battery-side energy, so inverter losses and a backup reserve reduce what reaches appliances.

How much does the FoxESS EP11 cost in Australia?

FoxESS publishes no EP11 price; its Australian product page shows none. The installed price comes from an itemised quote.

Before you accept a quote

FoxESS doesn’t publish a price for this battery, so the installed price comes from your quotes.

  • The quote names the EP11 and the exact FoxESS inverter, and states in writing what that inverter can supply from one EP11 with no solar.
  • For more than one EP11, it includes the junction box and cabling, and says units added later go in with the existing system at 50% ± 5% charge.
  • It lists the backed-up circuits, the EPS wiring and the reserve setting, checked against your appliances' starting loads.
  • It shows the location, shelter from sun and rain and 300 mm clearance, and names the installer who will register the warranty at commissioning.
  • It itemises the federal battery discount with the CEC-listed model EP11, usable capacity, STC count and certificate price.

Estimate the federal battery certificates for 10.36 kWh usable (opens in a new tab)

Check the model in your quote

Check that your quote names EP11 in the configuration this review covers.

Other FoxESS lines: FoxESS batteries

Australian support and warranty claims

Australian presence
FoxESS Australia Pty Ltd, Springvale
In Australia since
2020
Where claims go
Installer or authorised personnel only
Claim costs
Not stated

FoxESS Australian contact details (opens in a new tab) · Warranty document (opens in a new tab) · Checked

VPPs that list FoxESS Battery

Compare programs

These programs list the battery family. “Names EP11” marks a program whose published list names this line. Your exact battery, inverter and address still need approval; inclusion does not confirm warranty cover. How VPPs work.

All programs shown require an electricity account with the provider. If you already use that retailer, a switch may not be needed; a particular plan may still be required. Credits are before electricity costs and any program fees.

6 listings · 4 recorded as naming EP11 · Program A–Z

VPP programs for this battery
ProviderProgramNames EP11States listedReward snapshotLast checked
AGLAGL VPPYesNSW · VIC · QLD · SA

Sign-up, ongoing and event credits

SA ongoing credits conflict across published sources ($80 or $180 a year); AGL confirms your amount when you join.

AmberSmartShiftNot recordedNSW · VIC · SA · ACT · QLD (Energex)

Variable wholesale export earnings

CovaU EnergyVPP · BYO batteryYesNSW · VIC

15c/kWh during VPP events

ENGIEENGIE VPPYesNSW · VIC · SA

Monthly credits that vary by state

GloBird EnergyZEROHERO · VPP add-onNot recordedNSW · VIC · SA · QLD (Energex)

Conditional daily and export credits

Origin EnergyLoop · Battery LiteYesNSW · SA · VIC · QLD · ACT

$1/kWh during VPP events

  • Listed: NSW · VIC · QLD · SA

    Names EP11

  • Listed: NSW · VIC · SA · ACT · QLD (Energex)

  • CovaU Energy

    VPP · BYO battery

    Listed: NSW · VIC

    Names EP11

  • Listed: NSW · VIC · SA

    Names EP11

  • Listed: NSW · VIC · SA · QLD (Energex)

  • Listed: NSW · SA · VIC · QLD · ACT

    Names EP11

Reward snapshots — open the program for all credits, tariffs and conditions.

Source documents

6 documents

The documents behind this rating. Where we keep a copy, it is unmodified and dated; check the manufacturer for the latest version. We work out the rating with a fixed rubric from these documents and our VPP data. No manufacturer pays for a score or sees one before it is published.

Explore all solar batteries