Skip to content

Battery review · BW-BAT-9.6P

Neovolt BW-BAT-9.6P review

By CompareVolt · Updated · Last full check

AI studio illustration: Neovolt BW-BAT-9.6P wall-style battery cabinet with three status dots.

CompareVolt rating

6.9 out of 10

Older model · availability not confirmed

For Bytewatt inverters, a 9.6 kWh battery with 12-year cover, but only CEC-listed nameplates get the rebate.

  • Warranty12 yrs, unlimited home use, 70% kept
  • Functionality9.6 kWh, 4.8 kW DC; 3-phase unclear
  • VPP readiness3 programs; 1 names the 9.6P
  • Australian backingSince 2020; installer-only claims
How this score adds up
Rubric lines and points behind this rating
Warranty 9.0 (30%)
Term: 12 years2.5 of 3
Keeps 70% at year 101.5 of 2
Home use: unlimited cycles3.0 of 3
Conditions: none recorded2.0 of 2
Functionality 6.0 (35%)
Power and backup 4.0 · 60% of Functionality
Continuous power: 4.8 kW battery DC; the inverter sets AC output1.5 of 4
Backup equipment: comes from a separate Bytewatt inverter1.0 of 2
Backup output: set by the inverter1.0 of 2
Three-phase homes: Neovolt lists inverters only for the 9.6P I to VI; three-phase not recorded0.5 of 2
Capacity and expansion 8.0 · 30% of Functionality
Largest documented system: 54.6 kWh (six units in parallel, per the Australian datasheet)4.0 of 4
Adding later: 1 to 6 units in parallel documented3.0 of 4
Usable figure: 9.6 kWh for one unit, but 9.1 kWh each in the AU datasheet multi-unit row1.0 of 2
Enclosure 10.0 · 10% of Functionality
Enclosure rating: IP6510.0 of 10
4.0 × 60% + 8.0 × 30% + 10.0 × 10% = 5.8, rounded to the nearest half point: 6.0
VPP readiness 5.5 (15%)
Open programs: 1 names BW-BAT-9.6P, 2 list Neovolt3.5 of 8
Warranty room for VPP use: 4.1 MWh per kWh2.0 of 2
Australian backing 6.5 (20%)
Presence: importer Solar Capital Australia Pty Ltd; Neovolt office in Seven Hills NSW3.0 of 3
In Australia since 20201.5 of 2
Claim route: the installer contacts Bytewatt; no route for the owner is stated0.5 of 2
Claim costs: service rebate to installers, amount unstated; labour and freight costs unstated1.5 of 3
Overall: 9.0 × 30% + 6.0 × 35% + 5.5 × 15% + 6.5 × 20% = 6.925, rounded to one decimal: 6.9

Rubric 1.0 · scored 19 Nov 2026 · How we rate batteries · Source documents

Rated so far: 38 batteries, from 4.4 to 8.2. Compare similar batteries · Use the quote checklist

In a nutshell

What’s good

  • Twelve-year cover. Bytewatt's A13 Australian warranty gives the 9.6P twelve years from first installation, keeping at least 70% of usable capacity.
  • Household cycling uncapped. Solar self-consumption, time-of-use shifting and backup have unlimited cycles within the twelve years.
  • Back on the CEC list. The CEC relisted BW-BAT-9.6P on 7 October 2026 as BAT-1093, listed until 31 December 2027.
1 more good point
  • Up to six in parallel. Both datasheets allow one to six units in parallel, up to 57.6 kWh nominal.

What to watch

  • Nameplate decides rebates. Only units whose nameplate matches the CEC's listed details qualify for STCs; the 9.6P I to VI models remain suspended.
  • Documents disagree. Neovolt's datasheets and manuals give different usable capacity, voltage, current and weight figures.
  • No inverter list for it. Both inverter lists we found are for the 9.6P I to VI series; the 2025 guide for the BW-BAT-9.6P points to Neovolt's website.
1 more thing to watch
  • VPP use not named. Uses outside self-consumption, time-of-use shifting and backup are limited to 39.36 MWh, and the warranty doesn't mention VPPs.

Good fit for: An owner of a BW-BAT-9.6P checking warranty, rebate status or adding units, or a buyer holding a quote that names it with a Bytewatt inverter that Neovolt has confirmed for it.

Look elsewhere if: You want a battery whose documents agree on its capacity and inverter list, or you can't check the unit's nameplate before it's installed.

All specifications and notes

Capacity and power

Usable capacity9.6 kWhOne unit, per the CEC listing and Neovolt's December 2025 datasheet. Its February 2026 Australian datasheet gives 9.6 kWh for one unit but 9.1 kWh per unit in its multi-unit row.
Warranty12 years, 70%From first installation. Unlimited cycles for self-consumption, time-of-use shifting and backup; 39.36 MWh for any other use.
Battery power4.8 kW DCRated power of one unit, per the December 2025 datasheet and the CEC list. The Bytewatt inverter sets what your home gets.
Rebate eligibilityCheck the nameplateOnly units whose nameplate matches the CEC's listed voltage range, current and battery designation qualify for STCs.

Manufacturer’s figures

As stated in the manufacturer’s Australian datasheet. Shown for reference; they don’t change the score.

Dimensions590 × 730 × 205 mmWhether it fits the wall or cupboard where the installer plans to put it.Width × height × depth of one unit
Cell chemistryLFPThe type of battery cell the maker says is inside.

More specifications

Units in parallelUp to sixBoth datasheets say 1 to 6 in parallel. The older manual for the 9.6P I to VI stacks them no more than two high.
Voltage and current96 V; 50 A or 52.5 AFebruary 2026 sheet: 90–108 V, 50 A. December 2025 sheet: 90–105.6 V, 52.5 A, which matches the CEC's eligible nameplate.
Weight80, 86 or 90 kgDecember 2025 datasheet 80 kg, February 2026 datasheet 86 kg, older manual 90 kg.
Enclosure ratingIP65, indoor or outdoorKeep it out of direct sun. The older manual for the 9.6P I to VI bans outdoor installation within 500 m of the coast.
Operating temperatureCharge 0–50°C, discharge −10–50°CThe December 2025 sheet says performance is limited below 0°C or above 40°C.

What the system needs

BW-BAT-9.6P unitsOne to six 96 V cabinets connected in parallel.
Bytewatt inverterA Bytewatt inverter Neovolt confirms in writing for the BW-BAT-9.6P. Its lists for the 9.6P I to VI series name single-phase SPH3.6K, SPH5K and SPB5K and three-phase TPH4K and TPH5K.
Backup circuit and monitoringBackup comes from the inverter's backup port. Monitoring and updates run through the inverter's connection to Bytewatt's cloud app.

The BW-BAT-9.6P is a 96 V battery cabinet that connects in parallel to a separate Bytewatt inverter. This review covers one unit, its 2026 CEC suspension and relisting, and where Neovolt's documents disagree.

Capacity and power

The BW-BAT-9.6P is a 96 V lithium iron phosphate cabinet that connects in parallel with up to five more and needs a separate Bytewatt inverter. The CEC lists it at 9.6 kWh nominal and 9.6 kWh usable, with a 4.8 kW DC rating. Neovolt's December 2025 datasheet agrees, at 100% depth of discharge.

Neovolt's other documents don't. Its February 2026 Australian datasheet gives 9.6 kWh usable for one unit, but 9.1 to 54.6 kWh for one to six units, which is 9.1 kWh each. Its older V02 manual covers the "BW-BAT-9.6P I–VI", rated from 10.1 kWh (I) to 60.6 kWh (VI) of energy at 95% depth of discharge, with 9.6 kWh usable for the I. The CEC treats the 9.6P I to VI as separate models and keeps them suspended. The two datasheets also differ on voltage range (90–108 V against 90–105.6 V), current (50 A against 52.5 A) and weight (86 kg against 80 kg). Ask Neovolt which figures apply to the units you're buying or own.

The 4.8 kW is a battery rating, not what reaches your power points: the inverter sets that.

Backup and installation

We found no inverter list for the BW-BAT-9.6P itself. Its 2025 quick installation guide says it works only with compatible inverters and points to a list on Neovolt's website. The lists we found are for the 9.6P I to VI series. The older manual names three single-phase Bytewatt models only: BW-INV-SPH5K, SPH3.6K and SPB5K. An inverter declaration of October 2024 lists those three and adds the three-phase BW-INV-TPH4K and TPH5K. Get Neovolt to confirm your inverter in writing, especially on a three-phase home.

Backup comes from the inverter's backup port, not the battery, so the circuits it carries and the power available depend on the inverter and how it's wired. Both datasheets allow up to six units in parallel.

The cabinet is rated IP65 for indoor or outdoor use. Neovolt's 2025 quick installation guide says to keep it out of direct sun and at least 3 m from heat or fire, and shows it standing on the floor or a base, with a wall bracket supplied. The older manual says it should be mounted on the wall, needs 300 mm clearance and bans outdoor installation within 500 m of the coast or where sea breeze reaches. Both manuals forbid copying, so we keep no copies. Have the installer say which instructions they're following.

Warranty and ownership

The A13 edition of Bytewatt's Australian warranty gives the BW-BAT-9.6P twelve years from the date it was first installed. Within that, the battery should keep at least 70% of its usable capacity. Solar self-consumption, time-of-use shifting and backup have unlimited cycles. Any other use, or any mix that includes one, is limited to 39.36 MWh of throughput, measured at what the warranty calls the battery AC output. That's 4,100 full charges of 9.6 kWh. The warranty doesn't mention VPPs, so ask Bytewatt in writing how it treats VPP control before you join one. The capacity promise also requires ambient temperatures between −10°C and 50°C, and applies only if the battery is run as the specification and manual say. Neovolt's site also lists an older edition (A7) and a 2024 update statement, so if you bought earlier, ask which edition applies to you.

Working the warranty’s energy limits through at one full charge and discharge a day:

  • Home use: no throughput limit.
  • VPP and other uses: 39.36 MWh, about 4.1 MWh per usable kWh. At one full charge and discharge a day that is reached in about 11.2 years, before the 12-year term ends.

The warranty doesn't cover components "not initially sold by Bytewatt as a part of the system", including ones of the same model that the installer or owner sourced. Before adding units, get Bytewatt to confirm in writing that they will be covered.

The warranty is given to whoever bought the product from Bytewatt (a distributor, retailer or installer) or to the household where it's installed. Claims run through the installer, who contacts Bytewatt, sends an RMA form and returns the faulty unit within 30 days of receiving the replacement. Bytewatt may repair the battery on site or at a service centre, or send the closest product in its current range, which can differ in specification and size, and it may use refurbished parts. If a returned unit isn't faulty, Bytewatt charges an inspection fee or the cost of the replacement. In a dispute, whoever asks for independent testing pays for it. The warranty is governed by Chinese law, with Chinese courts having non-exclusive jurisdiction. Australian Consumer Law rights are separate.

Brand and Australian support

Support evidence checked 19 November 2026. Neovolt is the brand of Bytewatt Technology Co., Ltd of Suzhou, China. The warranty names a local contact in Australia at Rouse Hill, New South Wales, on 1300 901 706, and an Australian importer, Solar Capital Australia Pty Ltd of Underdale, South Australia. Neovolt's contact page gives an office in Seven Hills, New South Wales, the same 1300 number and service.au@byte-watt.com, and the CEC names Solar Capital Australia as Neovolt's registered importer at that email and number.

Solar Capital Australia's ABN has been active since 11 June 2020, now with a Seven Hills postcode (NSW 2147); from March 2024 to April 2026 it also held the business name Bytewatt Technology Australia. A separate company, Neovolt Technology AU Pty Ltd, registered in April 2026 with a Rouse Hill postcode; the warranty doesn't name it. We found no ASIC insolvency notices for Solar Capital Australia. Six years of records don't tell you how claims go.

The warranty doesn't say who pays labour, travel or return freight on an accepted claim. The installer may get a "service rebate" for replacing a unit Bytewatt finds defective, claimed within three months, and loses it if the faulty unit isn't returned within 30 days. The warranty sets out no route for a household whose installer has closed.

The CEC suspended several Neovolt batteries from 15 September 2026 for not complying with its listing terms; for the models still suspended, it says nameplates on units supplied in Australia don't match the testing and certification documents. It says the suspension wasn't based on a recall or a safety issue. On 7 October 2026 it lifted the suspension for the BW-BAT-9.6P, after Neovolt explained the variants it had imported and which stock belonged to each. Only units whose nameplate shows DC 90–105.6 V, DC 52.5 A and the listed battery designation qualify for STCs, and installations from 15 September to 6 October 2026 don't. The 9.6P I to VI models remain suspended, which also rules them out of any program or network that requires a CEC-approved product. The CEC says Neovolt has quarantined mislabelled stock that hadn't been installed, so it can be relabelled. If a nameplate doesn't match, the CEC says to contact Neovolt's registered importer, Solar Capital Australia, and the CEC itself if the importer doesn't respond.

Price and alternatives

Neovolt publishes no price; its Australian site lists documents and a contact form. The BW-BAT-9.6P is on the CEC approved battery list as BAT-1093, listed until 31 December 2027, which the federal battery rebate requires. Have the quote show the certificate count and price.

Neovolt's other reviewed battery, the BW-BAT-4.8S, is a different design: smaller 4.8 kWh modules stacked in series, with a ten-year warranty. These are specification differences, not a ranking; compare complete systems in the battery catalogue.

Who it suits

If you already own a BW-BAT-9.6P, photograph each unit's nameplate and keep it with the invoice, the inverter model and the installation date, which starts the twelve years. Before adding units, ask Neovolt whether your inverter takes them and whether new units match the old ones.

If you're comparing a quote, estimate your evening use with the battery size calculator and check how many 9.6 kWh units, less any backup reserve, cover it.

How it compares

Other reviewed batteries closest to 9.6 kWh of usable capacity.

See all reviewed batteries

Questions people ask

Is the Neovolt BW-BAT-9.6P CEC approved?

Yes. The CEC suspended it on 15 September 2026 and relisted it on 7 October 2026, listed until 31 December 2027. Only units with the listed nameplate details qualify for STCs, and the 9.6P I to VI models stay suspended.

Which inverter works with the BW-BAT-9.6P?

We found no inverter list for the BW-BAT-9.6P itself: its 2025 guide refers to a list on Neovolt's website. Documents for the 9.6P I to VI series name the SPH3.6K, SPH5K and SPB5K, and an October 2024 declaration adds the three-phase TPH4K and TPH5K, so get your model confirmed in writing.

How long is the Neovolt BW-BAT-9.6P warranty?

Twelve years from first installation, keeping at least 70% of usable capacity. Self-consumption, time-of-use shifting and backup have unlimited cycles; any other use is limited to 39.36 MWh, and VPP control isn't among the named uses.

Can the BW-BAT-9.6P be installed outside?

It's rated IP65 for indoor or outdoor use, but not in direct sun. Neovolt's older manual for the 9.6P I to VI also bans outdoor installation within 500 m of the coast or where sea breeze reaches.

How much does the Neovolt BW-BAT-9.6P cost?

Neovolt publishes no price. Its Australian site lists documents and a contact form, so the installed price comes from an itemised quote.

How long will 9.6 kWh last?

Divide 9.6 kWh by your average load: about 9.6 hours at 1 kW or 3.2 hours at 3 kW. Inverter losses, any backup reserve and the 9.1 kWh figure in one datasheet could make it less.

Before you accept a quote

Neovolt doesn’t publish a price for this battery, so the installed price comes from your quotes.

  • The quote names BW-BAT-9.6P (not a 9.6P I to VI model), the number of units and the exact Bytewatt inverter model.
  • The installer confirms each unit's nameplate shows DC 90–105.6 V, 52.5 A and the CEC's listed battery designation before installing it.
  • Neovolt confirms in writing that your inverter works with the BW-BAT-9.6P, and how many units it takes.
  • The A13 warranty (listed as CEC 20260928) is attached, with Bytewatt's written answer on whether VPP use counts against the 39.36 MWh limit.
  • Backup circuits, metering, commissioning, the STC count and GST are itemised.

Estimate the federal battery certificates for 9.6 kWh usable (opens in a new tab)

Check the model in your quote

Check that your quote names BW-BAT-9.6P in the configuration this review covers. Other sizes can differ in specifications and warranty.

Other sizes in this line: BW-BAT-9.6P I, 9.1 kWh usable · BW-BAT-9.6P II, 18.2 kWh usable · BW-BAT-9.6P III, 27.3 kWh usable · BW-BAT-9.6P IV, 36.4 kWh usable · BW-BAT-9.6P V, 45.5 kWh usable · BW-BAT-9.6P VI, 54.6 kWh usable

Other Neovolt lines: Neovolt batteries

Australian support and warranty claims

Australian presence
Importer Solar Capital Australia Pty Ltd; Neovolt office in Seven Hills NSW
In Australia since
2020
Where claims go
The installer contacts Bytewatt; no route for the owner is stated
Claim costs
Service rebate to installers, amount unstated; labour and freight costs unstated

Neovolt Australian contact details (opens in a new tab) · Warranty document (opens in a new tab) · Checked

VPPs that list Neovolt BW-BAT

Compare programs

These programs list the battery family. “Names BW-BAT-9.6P” marks a program whose published list names this line. Your exact battery, inverter and address still need approval; inclusion does not confirm warranty cover. How VPPs work.

All programs shown require an electricity account with the provider. If you already use that retailer, a switch may not be needed; a particular plan may still be required. Credits are before electricity costs and any program fees.

3 listings · 1 recorded as naming BW-BAT-9.6P · Program A–Z

VPP programs for this battery
ProviderProgramNames BW-BAT-9.6PStates listedReward snapshotLast checked
AmberSmartShiftNot recordedNSW · VIC · SA · ACT · QLD (Energex)

Variable wholesale export earnings

GloBird EnergyZEROHERO · VPP add-onNot recordedNSW · VIC · SA · QLD (Energex)

Conditional daily and export credits

Origin EnergyLoop · Battery LiteYesNSW · SA · VIC · QLD · ACT

$1/kWh during VPP events

  • Listed: NSW · VIC · SA · ACT · QLD (Energex)

  • Listed: NSW · VIC · SA · QLD (Energex)

  • Listed: NSW · SA · VIC · QLD · ACT

    Names BW-BAT-9.6P

Reward snapshots — open the program for all credits, tariffs and conditions.

Source documents

7 documents

The documents behind this rating. Where we keep a copy, it is unmodified and dated; check the manufacturer for the latest version. We work out the rating with a fixed rubric from these documents and our VPP data. No manufacturer pays for a score or sees one before it is published.

Explore all solar batteries