Battery review · IQ Battery 5P with FlexPhase (IQBATTERY-5P-3P-INT)
Enphase IQ Battery 5P with FlexPhase review
By CompareVolt · Updated · Last full check
Family reference image

CompareVolt rating
6.8 out of 10
Fits single- or three-phase homes in 5 kWh steps, but a three-phase unit gives only 1.28 kVA per phase.
6.8 out of 10
- Warranty15 yrs or 6,000 cycles; stay online
- Functionality5 kWh, 3.84 kW; controller extra
- VPP readiness1 program, at brand level only
- Australian backingSince 2013; warranty excludes labour
How this score adds up
| Warranty 8.0 (30%) | |
|---|---|
| Term: 15 years | 3.0 of 3 |
| Keeps 70% at year 10 | 1.5 of 2 |
| Home use: 6,000 cycles, 6.0 MWh per kWh | 2.5 of 3 |
| Conditions: Enphase: losing internet can void cover; no cover if activated after Energize By | 1.0 of 2 |
| Functionality 6.5 (35%) | |
| Power and backup 6.0 · 60% of Functionality | |
| Continuous power: 3.84 kW | 2.0 of 4 |
| Backup equipment: needs the IQ System Controller 3 INT, sold separately | 1.0 of 2 |
| Backup output: up to 3.84 kW | 1.0 of 2 |
| Three-phase homes: listed for three-phase homes; at most 1.28 kVA per phase per unit | 2.0 of 2 |
| Capacity and expansion 8.0 · 30% of Functionality | |
| Largest documented system: 50 kWh (ten three-phase units at one site, which takes one IQ System Controller 3 INT) | 4.0 of 4 |
| Adding later: every unit on a site shares one power rating, set at commissioning | 2.0 of 4 |
| Usable figure: 5 kWh, agreed | 2.0 of 2 |
| Enclosure 7.0 · 10% of Functionality | |
| Enclosure rating: IP55 | 7.0 of 10 |
| 6.0 × 60% + 8.0 × 30% + 7.0 × 10% = 6.7, rounded to the nearest half point: 6.5 | |
| VPP readiness 3.0 (15%) | |
| Open programs: 1 lists Enphase | 1.0 of 8 |
| Warranty room for VPP use: 6.0 MWh per kWh | 2.0 of 2 |
| Australian backing 8.5 (20%) | |
| Presence: Enphase Energy Australia Pty Ltd (importer), South Melbourne VIC | 3.0 of 3 |
| In Australia since 2013 | 2.0 of 2 |
| Claim route: owner claims through Enphase's return process; the owner's installer swaps it | 2.0 of 2 |
| Claim costs: freight paid, with a prepaid return label; removal and installation not covered | 1.5 of 3 |
| Overall: 8.0 × 30% + 6.5 × 35% + 3.0 × 15% + 8.5 × 20% = 6.825, rounded to one decimal: 6.8 | |
Rubric 1.0 · scored 17 Nov 2026 · How we rate batteries · Source documents
Rated so far: 38 batteries, from 4.4 to 8.2. Compare similar batteries · Use the quote checklist
In a nutshell
What’s good
- Single- or three-phase. One model can be set up for single- or three-phase homes; Enphase's AU wiring diagram shows only this battery for three-phase sites; its planning guides allow a single-phase IQ Battery 5P on L1.
- Works with existing solar. As an AC-coupled battery it is listed with IQ7, IQ8 and S Series microinverters and with string inverters, without replacing the solar inverter.
- Fifteen-year warranty. Cover runs 15 years or 6,000 discharged cycles from activation, with at least 60% of nameplate capacity at year 15.
2 more good points
- Fast backup switching. The IQ System Controller 3 INT lists a 0 ms load transition, provided the batteries' combined power exceeds the loads when the grid fails; disruption can vary with grid conditions.
- Field-replaceable parts. Microinverters, boards and the battery unit are listed as field-replacement parts, which an Enphase-certified installer swaps on site.
What to watch
- Low three-phase output. Set to three-phase, each unit gives 1.28 kVA per phase, so heavy single-phase appliances in an outage may need several units.
- Controller sold separately. Backup needs the separate IQ System Controller 3 INT; a grid-tied system gives no power in a blackout.
- Small 5 kWh steps. Each unit holds 5.0 kWh and weighs 83 kg installed, so larger capacities mean several wall- or pedestal-mounted units.
2 more things to watch
- Solar limits off-grid. IQ7 or S Series solar above 150% of battery power on a phase must be shed off-grid, and a string inverter is disconnected at a preset charge level.
- Warranty paperwork matters. Cover excludes batteries activated after their Energize By date, and a new owner must file a transfer form and pay a fee within 30 days.
Good fit for: A home with Enphase IQ7 or IQ8 microinverters, or a three-phase home, that wants AC-coupled storage added in 5 kWh steps with a 15-year warranty.
Look elsewhere if: You want backup without adding an IQ System Controller 3 INT, or you plan to add units after a discounted install and expect the federal discount on them too.
All specifications and notes
Capacity and power
| Usable capacity | 5 kWhUsable capacity of one unit. Enphase's footnote says it includes a 2% safety limit for long outages, and that a further 3% is kept overnight to run the battery's electronics. |
|---|---|
| Continuous AC output | Up to 3.84 kVAPer unit at the single-phase default. A three-phase unit gives 3.84 kVA in total, 1.28 kVA per phase. Lower-rated models start at 1.65 kVA. |
| Backup needs | IQ System Controller 3Without it the battery runs grid-tied only, through the IQ Gateway Metered and Communications Kit 2 INT, and gives no power in a blackout. |
| Warranty | 15 years, 6,000 cyclesWhichever comes first, from activation, with at least 70% capacity at year 10 and 60% at year 15. The warranty doesn't define a discharged cycle. |
Manufacturer’s figures
As stated in the manufacturer’s Australian datasheet. Shown for reference; they don’t change the score.
| Round-trip efficiency | 90% AC; 96% DCHow much of the energy you store comes back out when you use it.AC to the battery to AC at 50% power rating at 25°C, beginning of life |
|---|---|
| Cell chemistry | Lithium iron phosphate (LFP)The type of battery cell the maker says is inside.Datasheet p.1 |
More specifications
| Phase set-up | Single- or three-phaseShips set to single-phase; the installer converts it to three-phase at installation. |
|---|---|
| Power ratings | 1.65–3.84 kVA per unitThree-phase 1.84–3.84 kVA. Set once at commissioning for every battery on the site; below 3.84 kVA, Australian sites need at least two units. |
| Size and weight | 550 × 980 × 188 mm, 83 kgWidth × height × depth; 83 kg installed, 69.5 kg to lift. Wall bracket included; pedestal sold separately. |
| Operating temperature | −20°C to 55°CCharging −20°C to 50°C. Charging power falls below 15°C and above 45°C; discharging power below 5°C and above 50°C. |
| Enclosure | IP55, indoor or outdoorDirect sun is allowed, but the battery limits its power to stay at a safe temperature. Enphase gives 0–30°C as the optimum range. |
| System Controller rating | 80 A per phaseLists 80 A of backup load per phase; the FlexPhase planning guide caps total backed-up loads at 64 A. Holds the gateway, current sensors and a modem. |
What the system needs
| IQ Battery 5P with FlexPhase units | Each all-in-one AC-coupled unit holds 5.0 kWh with six IQ8T-BAT microinverters and a battery management system. Wall bracket in the box; pedestal optional. |
|---|---|
| Gateway and Communications Kit 2 | For grid-tied operation, the battery connects to the IQ Gateway Metered through the Communications Kit 2 INT, with an IQ Relay where local rules require one. |
| IQ System Controller 3 INT | Required for backup. Its automatic transfer switch moves backed-up circuits to battery power in an outage; it also holds the gateway, current sensors and a cellular modem. |
| Internet connection | The warranty asks for a continuous internet connection so Enphase can diagnose faults and update firmware remotely. |
The IQ Battery 5P with FlexPhase is a 5 kWh AC-coupled battery with six built-in microinverters, set up for single- or three-phase homes. This review covers one unit, how units stack, and what backup and retrofits need.
Capacity and power
One IQ Battery 5P with FlexPhase is a 5.0 kWh unit with six IQ8T-BAT microinverters inside. It connects on the AC side, so it needs no hybrid inverter: the microinverters turn the battery's 76.8 V DC into household AC. The August 2025 Australian datasheet gives 96% DC and 90% AC round-trip efficiency. Bigger systems are several identical units.
Output depends on set-up. At the factory default the unit is single-phase and gives up to 3.84 kVA continuously, with backup peaks of 33.4 A for three seconds. Set to three-phase, the same 3.84 kVA is split three ways, 1.28 kVA per phase. Installers can choose lower ratings, down to 1.65 kVA single-phase or 1.84 kVA three-phase, to meet network limits. The install guide says the rating is set once for every battery on the site, and any rating below 3.84 kVA needs at least two units in Australia.
This review covers FlexPhase; Enphase still sells the single-phase IQ Battery 5P, which we review separately. Enphase's homeowner battery page features only FlexPhase, and its System Controller guide lists only FlexPhase for Australian three-phase homes, though Enphase's planning guides let a single-phase IQ Battery 5P sit on L1 of a three-phase home; ask the installer which applies. Enphase's April 2026 FlexPhase planning guide sizes systems up to ten units, 50 kWh, at one site, and Enphase's July 2026 planning brief lists one IQ System Controller 3 INT per site; ask the installer how many units your phase set-up allows.
Backup and installation
Backup needs the IQ System Controller 3 INT. Without it, the battery runs grid-tied and stops in an outage. The controller datasheet describes an automatic transfer switch with the gateway, current sensors and a cellular modem built in, and lists 80 A of backup load per phase; the FlexPhase planning guide caps total backed-up loads at 64 A. The datasheet lists a 0 ms load transition, provided the batteries' combined power exceeds the loads at that moment, and says the disruption can vary with grid conditions.
The controller datasheet lists single- and three-phase backup, and the FlexPhase planning guide says a FlexPhase system can back up all three-phase loads; the controller's store page says single-phase backup. A three-phase unit gives 1.28 kVA per phase, so ask what each backed-up circuit can run. Enphase's FlexPhase best-practice brief says FlexPhase sites need controller firmware that supports FlexPhase, fitted at the factory or updated on site. Enphase's April 2026 FlexPhase planning guide lists two-phase supplies: the batteries are set to single-phase on L1, and backup covers L1 only.
For retrofits, the install guide lists the battery with IQ7, IQ8 and S Series microinverters and with string inverters. It excludes a string inverter mixed with IQ microinverters, M Series, and IQ7 mixed with IQ8, while the April 2026 FlexPhase planning guide lists IQ7 with IQ8 on one controller, with backup, as supported. A July 2025 installer update lets IQ8 expand an IQ7 site with the IQ Battery 5P, but only without backup, and it predates FlexPhase's Australian launch; confirm before mixing. Existing solar can also limit backup. The System Controller guide requires IQ7 or S Series solar above 150% of battery power on a phase to be shed off-grid, and says a string inverter is disconnected at a preset charge level and reconnected as charge falls. An older Enphase brief said a string inverter would not run in backup at all, and the FlexPhase datasheet's string-inverter note refers only to grid-tied systems. Get the off-grid design in writing.
The housing is IP55 for indoor or outdoor walls. The datasheet cuts discharge power below 5°C; the install guide gives full discharge power down to 0°C.
Warranty and ownership
Enphase's warranty for systems activated from 1 August 2026 covers the battery for 15 years from activation or 6,000 discharged cycles, whichever comes first, with at least 70% of nameplate capacity at year 10 and 60% at year 15. It doesn't define a discharged cycle or mention VPP use. Batteries activated from 15 June 2025 to 31 July 2026 have the June 2025 edition, with the same battery terms. The System Controller has 10 years, and the gateway, relay and Communications Kit five.
Working the warranty’s energy limits through at one full charge and discharge a day:
- Energy limit: 6,000 cycles, about 6.0 MWh per usable kWh. At one full charge and discharge a day that is reached in about 16.4 years, so the 15-year term ends first.
Four conditions are easy to miss. The warranty applies only when Enphase or an Enphase-authorised reseller sells the battery. A battery activated after the Energize By date on its box isn't covered. The warranty asks for a continuous internet connection, and the FlexPhase planning guide warns that losing it "can invalidate the warranty"; the warranty also excludes faults that up-to-date firmware would have avoided. A new owner must lodge a change-of-ownership form through Enphase's warranty page and pay a fee within 30 days of the sale.
Enphase chooses whether to repair, replace or refund, and pays to ship a justified replacement, but the warranty excludes removal and installation costs. Australian Consumer Law rights apply alongside it.
Brand and Australian support
Support evidence checked 17 November 2026. Enphase was founded in California in 2006. The warranty is given by Enphase Energy, Inc. and lists support on 1800 006 374. That gives you a local contact; it doesn't tell you how fast claims are handled. The datasheet names Enphase Energy Aust. Pty Ltd in South Melbourne as importer, matching the Australian contact page, and Enphase Energy Australia Pty Ltd has been active since 1 November 2013.
Owners can claim through Enphase's return process. Enphase ships a replacement to the home, sometimes only after the faulty unit comes back, and provides a prepaid return label. The datasheet lists the microinverters, boards and the battery unit as field-replacement parts, but only Enphase-certified installers may install or replace the battery, so labour still needs an installer. Enphase's labour reimbursement policy pays part of an installer's costs for replacing a faulty IQ Battery 5P within five years of activation, for installers without an Enphase supply agreement. It names the IQ Battery 5P, not FlexPhase, so ask how it applies.
We found no Enphase recall in the ACCC, CEC or Energy Safe Victoria registers on 17 November 2026. The FlexPhase CEC listing dates from 31 July 2025, so there is little Australian field history.
Price and alternatives
Enphase's Australian store shows no price for the battery; its How to buy link leads to Enphase's distributor list. Ask for an itemised installed quote covering each unit, the System Controller if you want backup, communications hardware, electrical work, commissioning and GST.
The federal program needs a battery of at least 5 kWh that is on the CEC list at installation. One unit meets the size rule, and the ten FlexPhase rating models are listed as BAT-646 until 31 December 2027. The single-phase 5P's listing, BAT-404, showed an expiry of 13 December 2026. Added capacity earns the discount only if the system hasn't already received one, so weigh buying the final number of units at once. The federal battery rebate guide explains the capacity bands.
The single-phase IQ Battery 5P has the same 5.0 kWh, 3.84 kVA and dimensions, but no three-phase or lower power settings. Compare complete systems, including hybrid-inverter batteries, in the battery catalogue. These are specification differences, not a ranking.
Who it suits
Estimate overnight use with the battery size calculator and divide by 5 kWh to see how many units a quote should include. Note your supply phase and the appliances that must run in an outage: a three-phase unit gives 1.28 kVA per phase.
If you plan to join a VPP, check the provider's list against your solar. On 11 November 2026 Amber's compatibility list named Enphase batteries with an IQ 7 or IQ 8 inverter and didn't mention string-inverter sites, and Amber's beta guidance lists Enphase as open beta. Before paying, match the model labels, power rating, Energize By dates and controller firmware against what is delivered.
How it compares
Other reviewed batteries closest to 5 kWh of usable capacity.
- Enphase IQ Battery 5P reviewRated 6.5 out of 105 kWh usableWarranty: 15 yrs or 6,000 cyclesOne difference: FunctionalityEnphase IQ Battery 5P5.5IQ Battery 5P with FlexPhase (IQBATTERY-5P-3P-INT)6.5

- SolaX Triple Power T-BAT H 5.8 V2 reviewRated 5.9 out of 105.1 kWh usableProduct warranty: Up to 10 yearsOne difference: WarrantySolaX Triple Power T-BAT H 5.8 V27.0IQ Battery 5P with FlexPhase (IQBATTERY-5P-3P-INT)8.0

- FoxESS EP5 battery reviewRated 6.6 out of 105.18 kWh usablePerformance warranty: 10 years or 19.2 MWhOne difference: VPP readinessFoxESS EP5 battery9.5IQ Battery 5P with FlexPhase (IQBATTERY-5P-3P-INT)3.0

Questions people ask
Do I need an IQ System Controller for the IQ Battery 5P with FlexPhase?
Only for backup. Grid-tied, the IQ Battery 5P with FlexPhase works through the IQ Gateway Metered and Communications Kit 2 INT, but without the IQ System Controller 3 INT it gives no power in a blackout.
What is the difference between the IQ Battery 5P and the FlexPhase version?
FlexPhase can be set up for single- or three-phase homes, with output from 1.65 to 3.84 kVA single-phase or 1.84 to 3.84 kVA three-phase, so installers can meet network limits.
Can I add an Enphase battery to my existing solar system?
Enphase lists it with IQ7, IQ8 and S Series microinverters and with string inverters. The install guide rules out a string inverter mixed with IQ microinverters, M Series, and IQ7 mixed with IQ8, but the FlexPhase planning guide lists IQ7 with IQ8 as supported.
How long is the Enphase IQ Battery 5P warranty?
15 years from activation or 6,000 discharged cycles, whichever comes first, with at least 70% capacity at year 10 and 60% at year 15. Batteries activated after the Energize By date aren't covered.
How much does the Enphase IQ Battery 5P with FlexPhase cost?
Enphase's Australian store page shows no price, and its How to buy link leads to Enphase's distributor list. The installed price, including any System Controller, comes from an itemised quote.
How long will a 5 kWh Enphase battery last?
Divide 5.0 kWh by your average load: about 5 hours at 1 kW or 1.7 hours at 3 kW for one unit at its single-phase setting. Part is held back for safety and overnight electronics, and losses reduce what reaches appliances.
Before you accept a quote
Enphase doesn’t publish a price for this battery, so the installed price comes from your quotes.
- The quote names IQBATTERY-5P-3P-INT, the number of units, single- or three-phase set-up and the kVA rating ticked on the multi-rating label.
- For backup, it includes a FlexPhase-ready IQ System Controller 3 INT and lists the backed-up circuits and the loads they must start.
- It says how your existing solar connects and what it does in an outage: PV shedding for IQ7 or S Series, or the string-inverter contactor.
- Each battery's Energize By date falls after the planned installation, and the quote names who activates the system and registers it.
- It itemises the federal discount for every unit now; units added later get none if this system has already received a discount.
Estimate the federal battery certificates for 5 kWh usable (opens in a new tab)
Check the model in your quote
Check that your quote names IQ Battery 5P with FlexPhase (IQBATTERY-5P-3P-INT) in the configuration this review covers.
Other Enphase lines: Enphase batteries
Australian support and warranty claims
- Australian presence
- Enphase Energy Australia Pty Ltd (importer), South Melbourne VIC
- In Australia since
- 2013
- Where claims go
- Owner claims through Enphase's return process; the owner's installer swaps it
- Claim costs
- Freight paid, with a prepaid return label; removal and installation not covered
Enphase Australian contact details (opens in a new tab) · Warranty document (opens in a new tab) · Checked
VPPs that list Enphase IQ Battery
Compare programsThese programs list the battery family. Your exact battery, inverter and address still need approval; inclusion does not confirm warranty cover. How VPPs work.
This program requires an electricity account with the provider. If you already use that retailer, a switch may not be needed; a particular plan may still be required. Credits are before electricity costs and any program fees.
1 listing · Program A–Z
| Provider | Program | States listed | Reward snapshot | Last checked |
|---|---|---|---|---|
| Amber | SmartShift | NSW · VIC · SA · ACT · QLD (Energex) | Variable wholesale export earnings |
Amber
SmartShiftListed: NSW · VIC · SA · ACT · QLD (Energex)
Reward snapshots — open the program for all credits, tariffs and conditions.
Source documents
9 documents
The documents behind this rating. Where we keep a copy, it is unmodified and dated; check the manufacturer for the latest version. We work out the rating with a fixed rubric from these documents and our VPP data. No manufacturer pays for a score or sees one before it is published.
- Enphase — Warranty, Storage Systems (AU and NZ), WRTY-00215-1.0, from 1 August 2026 (PDF, opens in a new tab)
PDF, 155 KB · Used for: Warranty, Australian backing
Retrieved from enphase.com
- Enphase — Enphase Energy System with FlexPhase planning guide (AU/NZ), TEB-00314-2.0, April 2026 (PDF, opens in a new tab)
PDF, 2.2 MB · Used for: Warranty, Functionality
Retrieved from enphase.com
- Enphase Australia — IQ Battery 5P with FlexPhase data sheet (AU/NZ), DSH-00745-4.0, August 2025 (PDF, opens in a new tab)
PDF, 2.7 MB · Used for: Functionality, Manufacturer’s figures, Review source
Retrieved from enphase.com
- Enphase — IQ Battery 5P with FlexPhase power ratings, tech note (AU/NZ), TEN-00043-1.0, July 2025 (PDF, opens in a new tab)
PDF, 39 KB · Used for: Functionality
Retrieved from enphase.com
- Enphase — Planning an Enphase Energy System, tech brief (AU/NZ), TEB-00051-3.0, July 2026 (PDF, opens in a new tab)
PDF, 1.2 MB · Used for: Functionality
Retrieved from enphase.com
- Enphase Australia — IQ System Controller 3 INT data sheet (AU/NZ), DSH-00008-4.0, June 2025 (PDF, opens in a new tab)
PDF, 1.5 MB · Used for: Australian backing
Retrieved from enphase.com
- abr.business.gov.au/ABN/View?abn=80166383035 (opens in a new tab)
Used for: Australian backing
Also linked in the review
Copies of documents the review text links. We don’t use them for the rating.
- Enphase — Warranty, Storage Systems (AU and NZ), from 15 June 2025 (PDF, opens in a new tab)
PDF, 217 KB · Used for: Review text
Retrieved from enphase.com
- Enphase — Labor reimbursement for warranty service (ANZ), ING-00060-1.0, August 2025 (PDF, opens in a new tab)
PDF, 211 KB · Used for: Review text
Retrieved from enphase.com