Skip to content

Battery review · IQ Battery 5P (IQBATTERY-5P-1P-ROW)

Enphase IQ Battery 5P review

By CompareVolt · Updated · Last full check

AI studio illustration: One Enphase IQ Battery 5P silver wall-mounted cabinet with a green status light and the ENPHASE logo.

CompareVolt rating

6.5 out of 10

Adds 5 kWh steps to single-phase or existing 5P sites, with an unclear unit limit and no three-phase backup.

  • Warranty15 yrs or 6,000 cycles; stay online
  • Functionality5 kWh, 3.84 kW; single-phase only
  • VPP readiness1 program, at brand level only
  • Australian backingSince 2013; warranty excludes labour
How this score adds up
Rubric lines and points behind this rating
Warranty 8.0 (30%)
Term: 15 years3.0 of 3
Keeps 70% at year 101.5 of 2
Home use: 6,000 cycles, 6.0 MWh per kWh2.5 of 3
Conditions: Enphase: losing internet can void cover; no cover if activated after Energize By1.0 of 2
Functionality 5.5 (35%)
Power and backup 5.0 · 60% of Functionality
Continuous power: 3.84 kW2.0 of 4
Backup equipment: needs the IQ System Controller 3 INT, sold separately1.0 of 2
Backup output: up to 3.84 kW1.0 of 2
Three-phase homes: single-phase; L1 backup only; Enphase guides differ on three-phase use1.0 of 2
Capacity and expansion 6.0 · 30% of Functionality
Largest documented system: 20 kWh (four units on L1 of one IQ System Controller 3 INT; Enphase also gives five)3.0 of 4
Adding later: the planning brief gives four per phase (p.9) but five on L1 (p.21)1.0 of 4
Usable figure: 5 kWh, agreed2.0 of 2
Enclosure 7.0 · 10% of Functionality
Enclosure rating: IP557.0 of 10
5.0 × 60% + 6.0 × 30% + 7.0 × 10% = 5.5
VPP readiness 3.0 (15%)
Open programs: 1 lists Enphase1.0 of 8
Warranty room for VPP use: 6.0 MWh per kWh2.0 of 2
Australian backing 8.5 (20%)
Presence: Enphase Energy Australia Pty Ltd (importer), South Melbourne VIC3.0 of 3
In Australia since 20132.0 of 2
Claim route: owner claims through Enphase's return process; the owner's installer swaps it2.0 of 2
Claim costs: freight paid, with a prepaid return label; removal and installation not covered1.5 of 3
Overall: 8.0 × 30% + 5.5 × 35% + 3.0 × 15% + 8.5 × 20% = 6.475, rounded to one decimal: 6.5

Rubric 1.0 · scored 17 Nov 2026 · How we rate batteries · Source documents

Rated so far: 38 batteries, from 4.4 to 8.2. Compare similar batteries · Use the quote checklist

In a nutshell

What’s good

  • Fits existing 5P sites. It matches an existing single-phase IQ Battery 5P system, and Enphase supports adding FlexPhase units at the same site later; an older controller may need a software update for FlexPhase.
  • Full output per unit. Each unit gives 3.84 kVA continuously and 7.68 kVA for three seconds; in a system of these units alone, backup power grows with each one, within Enphase's backed-up load limit.
  • Fifteen-year warranty. Cover runs 15 years or 6,000 discharged cycles from activation, with at least 60% of nameplate capacity at year 15.
2 more good points
  • Part of labour reimbursed. Enphase's labour policy names this battery and pays part of a replacement's labour for five years, to installers without an Enphase supply agreement.
  • Field-replaceable parts. Microinverters, boards and the battery unit are listed as field-replacement parts, which an Enphase-certified installer swaps on site.

What to watch

  • Single-phase only. On a three-phase home it backs up L1 at most, and Enphase's controller install guide says multiphase sites should take FlexPhase units only.
  • Listing expiry date. Its CEC listing, BAT-404, showed an expiry of 13 December 2026, and the federal discount needs a listing on the installation date.
  • Controller sold separately. Backup needs the separate IQ System Controller 3 INT; a grid-tied system gives no power in a blackout.
2 more things to watch
  • Unit limit unclear. Enphase's planning brief allows four units per phase on one controller in one place and five on L1 in another, and this battery connects to L1 only.
  • Solar limits off-grid. IQ7 or S Series solar above 150% of battery power must be shed in backup, and Enphase's guides differ on whether a string inverter runs off-grid.

Good fit for: A home that already has IQ Battery 5P units, or a single-phase home with Enphase IQ7, IQ8 or S Series microinverters, adding AC-coupled storage in 5 kWh steps with a 15-year warranty.

Look elsewhere if: You need three-phase backup, a lower power rating to stay within a connection limit, or the federal discount on an install that may fall after BAT-404's listed expiry of 13 December 2026.

All specifications and notes

Capacity and power

Usable capacity5 kWhUsable capacity of one unit at 100% depth of discharge. A backup reserve you set in the Enphase App is kept for outages while the grid is up, and the battery stops at a settable very-low charge level.
Continuous AC output3.84 kVA, single-phaseEnphase lists one rating, with peaks of 7.68 kVA for 3 seconds and 6.14 kVA for 10 seconds. Lower power settings are a FlexPhase feature.
Backup needsIQ System Controller 3Without it the battery gives no power in a blackout. The datasheet says it is also required for grid-tied use; the install guide uses a gateway and Communications Kit 2.
Warranty15 yrs or 6,000 cyclesWhichever comes first, from activation, with at least 70% capacity at year 10 and 60% at year 15. The warranty doesn't define a discharged cycle.

Manufacturer’s figures

As stated in the manufacturer’s Australian datasheet. Shown for reference; they don’t change the score.

Round-trip efficiency90% AC; 96% DCHow much of the energy you store comes back out when you use it.AC to the battery to AC at 50% power rating at 25°C (datasheet p.2)
Cell chemistryLithium iron phosphate (LFP)The type of battery cell the maker says is inside.Datasheet p.1

More specifications

PhaseSingle-phase onlyEnphase's planning guides put it on L1 of a three-phase home, backing up L1 only; its controller install guide says multiphase sites take FlexPhase only.
CEC listingBAT-404, expiry 13 Dec 2026Listed as B05-T02-ROW00-1-2, the IQ Battery 5P unit in the IQBATTERY-5P-1P-ROW box, approved 2 May 2023. Checked 17 November 2026.
Most 5P units per controller4 or 5 on L1 (20–25 kWh)Enphase's planning brief gives four per phase in its sizing steps but five on L1 in its parts table; the battery connects to L1 only.
Size and weight550 × 980 × 188 mm, 78.9 kgWidth × height × depth; 78.9 kg installed, 66.3 kg to lift. Wall bracket included; pedestal sold separately.
Operating temperature−20°C to 55°CDischarging −20°C to 55°C; charging −20°C to 50°C. Enphase gives 0–30°C as the optimum range.
EnclosureIP55, outdoor-ratedThe six IQ8D-BAT microinverters inside are IP67. Cooled by natural convection, with no fans; rated to 2,000 m altitude.

What the system needs

IQ Battery 5P unitsEach all-in-one AC-coupled unit holds 5.0 kWh with six IQ8D-BAT microinverters and a battery management system. Wall bracket in the box; pedestal optional.
IQ System Controller 3 INTRequired for backup. Its automatic transfer switch moves backed-up circuits to battery power in an outage; it also holds the gateway, current sensors and a cellular modem.
Gateway and Communications Kit 2For grid-tied use without backup, the install guide connects the battery to an IQ Gateway Metered through Communications Kit 2, with an IQ Relay on each battery circuit.
Internet connectionEnphase requires Wi-Fi or Ethernet as the main connection, and the warranty asks for a continuous internet connection.

The IQ Battery 5P is Enphase's single-phase 5 kWh AC-coupled battery with six built-in microinverters. This review covers one unit, how many fit on one controller, and when it makes sense beside FlexPhase.

Capacity and power

One IQ Battery 5P is a 5.0 kWh single-phase unit with six IQ8D-BAT microinverters inside. It connects on the AC side, so it needs no hybrid inverter. Enphase's August 2025 Australian datasheet gives 3.84 kVA continuous output, peaks of 7.68 kVA for three seconds and 6.14 kVA for ten, 100% depth of discharge, and 96% DC and 90% AC round-trip efficiency. It lists one power rating and no three-phase mode.

Bigger systems are several identical units, each adding 5 kWh. Enphase's July 2026 planning brief allows four IQ Battery 5P units per phase on one IQ System Controller 3 INT in its sizing steps, but its parts table says five on L1. It also says that, at present, the battery connects only to L1, so one controller takes four or five of these units, 20 or 25 kWh; ask the installer which limit applies. Enphase's store page adds that each unit may use about 150–400 Wh a day to power its own standby systems, depending on the battery profile.

This review covers the single-phase IQ Battery 5P (IQBATTERY-5P-1P-ROW). Enphase's homeowner pages now lead with the IQ Battery 5P with FlexPhase, which we review separately, but the single-phase unit is still in Enphase's Australian store and on its installer battery page.

Backup and installation

Backup needs the IQ System Controller 3 INT. Its datasheet describes an automatic transfer switch with the gateway, current sensors and a cellular modem built in, and lists 80 A of backup load per phase. The datasheet also lists a 0 ms load transition, provided the batteries' combined power exceeds the loads at that moment, and says the disruption can vary with grid conditions. Enphase's FlexPhase planning guide caps backed-up loads at 64 A, so ask which limit your design uses. Without the controller, the battery runs grid-tied and stops in an outage.

Enphase's documents differ on grid-tied systems. The battery datasheet says the controller is required for grid-tied and backup use, while the install guide and the FlexPhase planning guide use the IQ Gateway Metered and Communications Kit 2 for grid-tied systems. Ask which your installer will fit.

On a three-phase home Enphase's planning guides connect the IQ Battery 5P to L1, backing up L1 loads only, but the System Controller's install guide says "For multiphase sites, use only IQBATTERY-5P-3P-INT" (the FlexPhase model), so ask the installer which applies. The FlexPhase planning guide supports both models on one site, grid-tied or with backup. FlexPhase units set to three-phase then carry all the backup power, at 1.28 kVA per unit on each phase, and the IQ Battery 5P units only lengthen backup on L1.

Enphase's FlexPhase best-practice brief adds that a controller without its FlexPhase-ready marking can run the single-phase IQ Battery 5P on a single-phase site, while FlexPhase sites need the marking or an on-site software update.

Existing solar can limit backup. The install guide lists the battery with IQ7, IQ8 and S Series microinverters and with string inverters, but not with M Series or the older AC Battery. IQ7 or S Series solar above 150% of battery power must be put on shedding contactors in backup.

String inverters are where Enphase's guides differ most. The 2024 install guide says one runs only while the grid is up. The System Controller's install guide and the FlexPhase planning guide let it run off-grid through a contactor that disconnects it at a set charge level and reconnects it as charge falls. On mixing IQ7 and IQ8 microinverters, the install guide and Enphase's March 2026 expansion brief use two gateways, while the FlexPhase planning guide lists both on one controller. Get the off-grid design in writing.

The housing is rated IP55 for indoor or outdoor walls and is cooled without fans.

Warranty and ownership

Enphase's warranty for systems activated from 1 August 2026 names the IQ Battery 5P and covers it for 15 years from activation or 6,000 discharged cycles, whichever comes first, with at least 70% of nameplate capacity at year 10 and 60% at year 15. It doesn't define a discharged cycle or mention VPP use. The same document covers the FlexPhase version on the same terms.

Working the warranty’s energy limits through at one full charge and discharge a day:

  • Energy limit: 6,000 cycles, about 6.0 MWh per usable kWh. At one full charge and discharge a day that is reached in about 16.4 years, so the 15-year term ends first.

The System Controller has 10 years, and the gateway, relay and Communications Kit five. Enphase's warranty page keeps the June 2025 edition for systems activated from 15 June 2025 to 31 July 2026; its battery terms are the same.

Four conditions are easy to miss. The warranty applies only when Enphase or an Enphase-authorised reseller sells the battery. A battery activated after the Energize By date on its box isn't covered. The warranty asks for a continuous internet connection, and Enphase's FlexPhase planning guide warns that losing it "can invalidate the warranty"; the warranty also excludes faults that up-to-date firmware would have avoided. A new owner must lodge a change-of-ownership form and pay a fee within 30 days of the sale.

Enphase chooses whether to repair, replace or refund, and pays to ship a justified replacement, but the warranty excludes removal and installation costs. Australian Consumer Law rights apply alongside it.

Brand and Australian support

Support evidence checked 17 November 2026. Enphase was founded in 2006. The warranty is given by Enphase Energy, Inc., the Californian manufacturer, and lists Australian support on 1800 006 374. The datasheet names Enphase Energy Aust. Pty Ltd in South Melbourne as importer, matching the Australian contact page, and Enphase Energy Australia Pty Ltd has been active since 1 November 2013. A long local presence doesn't tell you how claims go.

Owners claim through Enphase's return process. Enphase ships a replacement to the home, sometimes only after the faulty unit comes back, and provides a prepaid return label. Only Enphase-certified installers may install or replace the battery, so labour still needs an installer. Enphase's labour reimbursement policy names the IQ Battery 5P: it pays installers without an Enphase supply agreement part of the cost of replacing a faulty unit within five years of activation.

We found no Enphase recall in the ACCC, CEC or Energy Safe Victoria recall lists on 17 November 2026.

Price and alternatives

Enphase's Australian store page for the IQ Battery 5P shows no price and says to contact a local authorised Enphase distributor. Ask for an itemised installed quote covering each unit, the System Controller if you want backup, communications hardware, electrical work, commissioning and GST.

The federal program needs a battery of at least 5 kWh that is on the CEC list at installation. One unit meets the size rule. On 17 November 2026 the IQ Battery 5P's listing, BAT-404, named the unit B05-T02-ROW00-1-2, approved on 2 May 2023, with an expiry of 13 December 2026.

If your install could fall after that date and the quote includes the discount, have the installer confirm the listing on the day. Added capacity earns the discount only if the system hasn't already received one. The federal battery rebate guide explains the capacity bands.

The FlexPhase version has the same 5.0 kWh and up to 3.84 kVA, adds three-phase and lower power settings from 1.65 kVA, and its listing, BAT-646, showed an expiry of 31 December 2027. Compare complete systems, including hybrid-inverter batteries, in the battery catalogue. These are specification differences, not a ranking.

Who it suits

The IQ Battery 5P fits a single-phase home, or a site that already has IQ Battery 5P units, where 3.84 kVA per unit covers the loads that must run in an outage. Estimate overnight use with the battery size calculator and divide by 5 kWh to see how many units a quote should include, up to four on one controller by the stricter of Enphase's two figures.

On a new single-phase install the two models match on headline specs: FlexPhase at its default setting has the same 5 kWh, 3.84 kVA and peaks, and its CEC listing shows the later expiry. Compare the quotes. If you need three-phase backup, or a lower power rating to stay within a connection limit, FlexPhase is the model Enphase builds for that.

If you plan to join a VPP, check the provider's list against your solar. On 17 November 2026 Amber's compatibility list named Enphase batteries with an IQ 7 or IQ 8 inverter and didn't mention string-inverter sites. Its beta guidance listed Enphase in open beta, where connectivity dropouts, missed commands and paused automation are possible. Before paying, match the model label, the Energize By dates and the CEC listing against what is delivered.

How it compares

Other reviewed batteries closest to 5 kWh of usable capacity.

See all reviewed batteries

Questions people ask

What is the difference between the IQ Battery 5P and the FlexPhase version?

The IQ Battery 5P is single-phase only, with one 3.84 kVA rating. The FlexPhase version can be set up for single- or three-phase homes, with ratings from 1.65 kVA. Both hold 5.0 kWh, and one warranty covers both on the same terms.

Can I add FlexPhase batteries to an existing IQ Battery 5P system?

Yes, grid-tied or with backup, says Enphase's FlexPhase planning guide. On a three-phase site, FlexPhase units set to three-phase carry all the backup power, 1.28 kVA per unit on each phase, and the IQ Battery 5P units only lengthen backup on L1.

Do I need an IQ System Controller for the Enphase IQ Battery 5P?

For backup, yes. Enphase's install guide runs a grid-tied system through the IQ Gateway Metered and Communications Kit 2, but the datasheet says the controller is required for grid-tied use too, so confirm the design in your quote.

Is the Enphase IQ Battery 5P eligible for the federal battery rebate?

The program needs a battery of at least 5 kWh on the CEC list at installation. On 17 November 2026 the IQ Battery 5P's listing, BAT-404, showed an expiry of 13 December 2026, so check it is listed on your install date.

How long is the Enphase IQ Battery 5P warranty?

15 years from activation or 6,000 discharged cycles, whichever comes first, with at least 70% capacity at year 10 and 60% at year 15. Batteries activated after the Energize By date on the box aren't covered.

How long will a 5 kWh Enphase battery last?

Divide 5.0 kWh by your average load: about 5 hours at 1 kW or 1.7 hours at 3 kW for one unit. A backup reserve you set holds part back while the grid is up, and conversion losses reduce what reaches appliances.

Before you accept a quote

Enphase doesn’t publish a price for this battery, so the installed price comes from your quotes.

  • The quote names IQBATTERY-5P-1P-ROW and the number of units, and says which phase they connect to.
  • For backup, it includes the IQ System Controller 3 INT and lists the backed-up circuits and the largest load they must start.
  • It says what your solar does in an outage: shedding for IQ7 or S Series above 150% of battery power, and how any string inverter is switched.
  • If it includes the federal discount, BAT-404 is listed on the install date; units added later get none if this system already received one.
  • Each box's Energize By date falls after the planned installation, and the quote names who activates and registers the system.

Estimate the federal battery certificates for 5 kWh usable (opens in a new tab)

Check the model in your quote

Check that your quote names IQ Battery 5P (IQBATTERY-5P-1P-ROW) in the configuration this review covers.

Other Enphase lines: Enphase batteries

Australian support and warranty claims

Australian presence
Enphase Energy Australia Pty Ltd (importer), South Melbourne VIC
In Australia since
2013
Where claims go
Owner claims through Enphase's return process; the owner's installer swaps it
Claim costs
Freight paid, with a prepaid return label; removal and installation not covered

Enphase Australian contact details (opens in a new tab) · Warranty document (opens in a new tab) · Checked

VPPs that list Enphase IQ Battery

Compare programs

These programs list the battery family. Your exact battery, inverter and address still need approval; inclusion does not confirm warranty cover. How VPPs work.

This program requires an electricity account with the provider. If you already use that retailer, a switch may not be needed; a particular plan may still be required. Credits are before electricity costs and any program fees.

1 listing · Program A–Z

VPP programs for this battery
ProviderProgramStates listedReward snapshotLast checked
AmberSmartShiftNSW · VIC · SA · ACT · QLD (Energex)

Variable wholesale export earnings

  • Listed: NSW · VIC · SA · ACT · QLD (Energex)

Reward snapshots — open the program for all credits, tariffs and conditions.

Source documents

7 documents

The documents behind this rating. Where we keep a copy, it is unmodified and dated; check the manufacturer for the latest version. We work out the rating with a fixed rubric from these documents and our VPP data. No manufacturer pays for a score or sees one before it is published.

Also linked in the review

Copies of documents the review text links. We don’t use them for the rating.

Explore all solar batteries