Skip to content
Contextual photograph of an installer fixing a solar panel; not a battery installation or a recommended installer.

Before you sign

Solar battery installation quote checklist: what to get in writing

By CompareVolt

Reading time: 6 minPublished: 27 Oct 2026Full review: 27 Oct 2026

Compare the complete installed system, not just the battery price. Get the equipment, backup limits, extra work, incentive assumptions and support commitments in writing.

Get these seven answers before accepting a quote

A useful quote describes the system you will receive, the work included and who will support it. A cabinet price or a large rebate headline cannot answer those questions. The ACCC recommends comparing multiple quotes for systems of the same size, with all costs explained.

Use this checklist beside each quote. Save or print this page and keep the supplier's written answers with the revised quote.

  1. Equipment: Exact battery and inverter models, module count, usable capacity and power ratings.
  2. Installation: Equipment location, required electrical work, included accessories and separately priced exclusions.
  3. Backup: Included equipment, backed-up circuits and phases, output limits and solar recharging during outages.
  4. Price: Installed total including GST, itemised costs, incentive deductions and payment terms.
  5. Eligibility: Assumptions about installation date, equipment, installer and any required program participation.
  6. Support: Named seller and installer, product and workmanship warranties, claim contacts and possible claim costs.
  7. Handover: Commissioning, approvals, operating instructions, monitoring access and completion documents.

Researched from Australian Government, regulator and ACCC guidance checked 27 October 2026. This is a checklist for discussion, not an assessment of your quote or installation.

These are practical questions for your supplier. The appropriate technical design and documents depend on your home, equipment and jurisdiction.

Compare the exact battery and inverter configuration

The government's quote guidance calls for equipment makes and models and a site-specific design. Ask for model numbers and module quantities rather than a brand name or an unexplained package label. If substitutions are allowed, ask how you will approve a replacement and any price change.

Keep usable energy in kWh separate from power in kW. Ask which figure describes the complete proposed battery system, rather than one module, and whether the output rating applies during normal operation or backup. A larger capacity figure does not answer whether the system can run your chosen appliances.

For an addition to existing solar, have the installer identify the retained inverter and confirm compatibility with the proposed arrangement. Ask what must be replaced or added. Use our battery size calculator as a starting point for the capacity discussion; the installer still needs to assess your usage and site.

Ask what the installed price actually includes

Request a site assessment and a marked equipment location before comparing final packages. Government guidance highlights switchboard issues, access and equipment positioning as potential sources of unexpected work.

Ask the quote to separate battery and inverter hardware, installation labour and accessories. Have the supplier identify any switchboard or mains-wiring upgrade, metering or network work, mounting or protective work, cable runs and removal of replaced equipment. These are questions about your site, not a claim that every installation needs every item.

For each exclusion or allowance, ask who arranges it, whether the amount is fixed and how an extra charge will be agreed. If the design depends on network approval, ask who applies and what happens to the price or contract if approval changes the proposed system.

Get backup capability and control promises in writing

A home battery does not automatically provide blackout supply. Government battery guidance explains that backup depends on configuration and may cover selected circuits or phases. Ask the supplier to identify the backup device or gateway, commissioning and circuit work included in the price.

Request a list of backed-up circuits, the continuous output available, and the restrictions on running or starting appliances together. Ask whether the existing solar can recharge the battery during an outage. Our blackout backup guide explains these questions in more detail.

If a VPP offer is part of the package, request its separate terms: payments, retailer requirements, battery access, reserve settings, fees and exit conditions. The equipment's technical capability is not proof of acceptance by a particular provider. Read what joining a VPP involves before accepting a bundled commitment.

Separate the installed total from discounts and forecasts

Ask for an AUD total including GST, equipment and installation costs, extra-work allowances, and each discount shown separately. Check the quote's expiry, deposit, payment stages and cancellation terms. The government quote checklist recommends a cost breakdown and clear rebate deductions. A manufacturer hardware price is not a complete installation quote.

For an incentive deduction, ask the supplier to name the scheme, explain eligibility, check any prior battery claim and show the installation-date and capacity assumptions. The CER retailer guidance sets out battery STC responsibilities. Confirm who makes the claim or receives assigned certificates, what fees reduce the credit, and what happens if the installation is delayed or eligibility fails. Check the current federal battery rebate explanation and the relevant state guide before relying on the deduction.

Treat savings and payback figures as supplier estimates with assumptions to examine. Ask which usage data, electricity tariff, solar output, losses and battery behaviour they use, and whether they assume VPP income. The ACCC identifies usage, installed costs, incentives and electricity rates as factors in financial value. This checklist does not calculate a return.

Identify the installer and the support you are buying

Ask for the seller's legal business name, ABN and contact details, and who will install the system if work is subcontracted. For battery STC eligibility, the Clean Energy Regulator distinguishes SAA-accredited designers and installers from CEC-listed products. Ask the supplier to identify the relevant accredited person, applicable electrical licence and equipment eligibility. Check these before the job; a company logo alone does not establish the installer's credentials.

Request separate product and installation-workmanship warranty documents. The government warranty guide explains the distinction and why claim expenses matter. Ask about capacity or throughput limits, registration and internet conditions, and who pays labour, travel, freight or removal costs on a claim. Ask who provides local support and whether monitoring needs a paid subscription. Our battery lifespan and warranty guide explains why a headline year count is incomplete.

Manufacturer warranties are separate from automatic consumer guarantees. The ACCC says those guarantees apply to products and installation services. It also distinguishes buying both from one business from using separate product and installation contracts. Keep a clear first contact for each responsibility; do not assume subcontracting removes the seller's obligations.

Agree on handover before the work begins

Ask who will commission the system, demonstrate the agreed functions and explain any remaining connection or approval steps. Request the applicable electrical safety or compliance certificate, commissioning records, final equipment details, warranties, owner instructions and support contacts. The government's handover guidance recommends retaining these records, including shutdown and isolation instructions and monitoring information.

If backup is included, ask for a demonstration of the agreed backup arrangement and an explanation of its operating limits. Have the installer give you access to any monitoring account and show you where to find charge, reserve and fault information. Keep the instructions; follow the installer and manufacturer guidance rather than experimenting with electrical equipment.

Before accepting, send the supplier your unanswered checklist items and request one revised written package. If two quotes still describe different capacity, backup or installation scope, have those differences explained before deciding whether one price is better for your needs.

Compare

Check the models on your quote

Read the named model's inverter, backup and warranty qualifications before comparing installed packages.

Browse solar battery reviews

Primary sources (7)

Related pages